EarthLinked HCM-1860C Manuale di installazione e manutenzione - Pagina 12

Sfoglia online o scarica il pdf Manuale di installazione e manutenzione per Condizionatore d'aria EarthLinked HCM-1860C. EarthLinked HCM-1860C 13. Hybrid cooling module

Stampa la pagina

3. The supplied sensor has to be attached to the liquid line using the copper strap

provided. If necessary, the sensor wire can be extended to a maximum of 25' using 18/2

thermostat wire. The sensor shall be connected to the sensor terminal block at the HCM.

Once attached to the liquid line, the sensor should be insulated with 1/2" wall thickness

Armaflex, Insul-Tube or equivalent insulation. See Figure 7.

Sensor

Terminal

Block

Copper

Strap

4. The Hybrid Cooling Module contains a thermostatic actuated fan speed control that has

been factory set for a pre-determined R-410A system condensing temperature.

5. Check all wiring and electrical connections to ensure proper routing and good

contact before restoring electric power, evacuating and recharging system in

accordance with the current EarthLinked

HCM-IMM (10/16)

Figure 7. Hybrid Cooling Module Sensor Wiring

system installation manual.

Line voltage

Terminal

Block (see

Figure 6 for

line voltage

entrance

location)

Sensor -

to be

attached

to earth

loop liquid

line and

insulated