Dell UltraSharp U2719D Manuale - Pagina 3
Sfoglia online o scarica il pdf Manuale per Monitor Dell UltraSharp U2719D. Dell UltraSharp U2719D 6.
Stampa la pagina
Tear off 1pcs acetate tape, then disconnect the panel
S12
lamp cables from the connectors of the panel module
and power board.
U
se a Philips-head screwdriver to remove 4pcs
screws for locking the bracket chassis module with
S13
the panel
.
(No.1~4 Screw size= M3x0.5x3, Torque=5~6kgfxcm)
2
1
Lift up the bracket chassis, and disconnect the LVDS
S14
cable from the connector of the panel module, then
put the bracket chassis on a protective cushion.
S15
3
S16
4
S17
Turn over the bracket chassis module. Remove the
Mylar from the hooks of the bracket, and then use a
Philips-head screwdriver to remove
unlocking AC power outlet.
(No.1~2 screw size=M3x10, Torque=6
2
Use a Philips-head screwdriver to remove
screws for unlocking power board and interface
board.
(No.1 screw size=M4x8, Torque=6
No.2~6 screw size=M3x7.5, Torque=6
2
6
5
4
Remove the circuit boards from the
chassis module carefully, and then
of the cables.
3
DELL U2719D
Go to contents page
two
screws for
kgfxcm)
±0.5
1
6pcs
kgfxcm;
±0.5
kgfxcm)
±0.5
4
1
bracket
disconnect all