DHD 52/MX Manuale di installazione - Pagina 9

Sfoglia online o scarica il pdf Manuale di installazione per Mixer musicale DHD 52/MX. DHD 52/MX 20. Series 52

Stampa la pagina
7
Series 52 - 52/MX Mixing Console Installation Guide
3. Connect the PoE switches with each other and at least one of them with an outward RJ45 jack via CAT5 cables to
establish the ethernet connection between these modules. (See the green cables in the picture below.) Afterwards the
52-4050 controller modules and the 52-4015 TFT screens need be connected to the PoE switches. (See the blue cables
in the picture below.)
4. In the next step you have to connect the control modules via ribbon cables to the red post connectors of the 52-4050
Console Controller modules. An 52-4050 module is able to handle up to eight control modules. This number is limited to
four, if you use motor faders. (See the brown cables in the picture below.) Mount the control modules in the console
frame after you have wired them.
5. Finally, you have to connect the outward connectors. The RJ45 connector needs to be wired with the DSP Frame and
the speakon jack with a power supply unit. (See System Wiring)
Some other wiring examples can be found in the 52/MX manual. There you can find wiring options e.g. for a distant TFT
screen, a power supply unit with internal PoE switch as well as consoles and networks for smaller and larger applications.
© 2010 DHD Deubner Hoffmann Digital GmbH
Specifications and design are subject to change without notice. The content of this document is for information only. The information presented in this document does not form part
of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. No liability will be accepted by the publisher for any consequence of its use.
Publication thereof does neither convey nor imply any license under patent rights or other industrial or intellectual property rights.
Note
To power the modules of the mixing console, you need at least one PoE switch
(Power over Ethernet) and a power supply.
Wiring an 52/MX Mixing Console.