Dell XPS One 24 Manuale di servizio - Pagina 47

Sfoglia online o scarica il pdf Manuale di servizio per Monitor Dell XPS One 24. Dell XPS One 24 50. Service manual

Boot Settings

Configuration

Security

Device Detect

Error

Exit

Exit Options

Boot Sequence

This feature allows you to change the boot sequence for the bootable devices

installed on your computer.

•

Hard Drive — The computer attempts to boot from the primary hard

drive. If no operating system is on the drive, the computer attempts to

boot from the next bootable device in the boot sequence.

•

CD Drive — The computer attempts to boot from the CD drive. If no CD

is in the drive, or if the CD has no operating system, the computer

attempts to boot from the next bootable device in the boot sequence.

•

USB Flash Device — The computer attempts to boot from the USB drive.

If no USB is in the drive the computer attempts to boot from the next

bootable device in the boot sequence.

NOTE:

To boot to a USB device, the device must be bootable. To ensure that your

device is bootable, check the device documentation.

NOTE:

An error message is generated only after the computer attempts to boot

from every device in the boot sequence and no operating system is found.

Allows the BIOS to skip certain tests while booting. This

decreases the time needed to boot the system.

Allows you to set or change the supervisor password.

Allows you to enable or disable the device error report.

Provides options to Save Changes and Exit, Discard Changes

and Exit, Load Optimal Defaults, and Discard Changes.

System Setup