Dell PowerVault DR4100 Manuale delle migliori pratiche - Pagina 31

Sfoglia online o scarica il pdf Manuale delle migliori pratiche per Immagazzinamento Dell PowerVault DR4100. Dell PowerVault DR4100 41. Backup and recovery appliance
Anche per Dell PowerVault DR4100: Manuale introduttivo (10 pagine), Manuale (37 pagine), Nota di rilascio (16 pagine), Manuale (12 pagine), Manuale (24 pagine), Manuale (23 pagine), Impostazione di Qiuck (1 pagine), Manuale (27 pagine), Manuale (25 pagine)

Stampa la pagina
Dell PowerVault DR4100 Manuale delle migliori pratiche
1.
Use the following command to assign a static IP to eth2 on DR1:
network --create_eth --nwif <eth0,eth2,ethN> --static --ip <ip_address> --netmask <netmask>
administrator@DR1 > network --create_eth --nwif eth2 --static --ip 172.20.20.2 --netmask
255.255.255.0
2.
Use the following command to assign a static IP to eth3 on DR1:
network --create_eth --nwif <eth0,eth2,ethN> --static --ip <ip_address> --netmask <netmask>
administrator@DR1 > network --create_eth --nwif eth3 --static --ip 172.20.22.2 --netmask
255.255.255.0
3.
Ensure connectivity of DR1 eth2 and eth3 by pinging the gateway using the following command:
network --ping --destination <destination_ip_address> --interface <ethN>
administrator@DR1 > network --ping --destination 172.20.20.1 --interface eth2
administrator@DR1 > network --ping --destination 172.20.22.1 --interface eth3
4.
On DR2 use the following commands to release 1GB interfaces eth and eth3 from bond0:
network --delete --member <eth0,eth1,ethN>
network –restart
network –show
administrator@DR2>
administrator@DR2 > network --restart
administrator@DR2 > network --show
5.
Use the following commands to assign IP address to eth2 and eth3 on DR2:
network --create_eth --nwif <eth0,eth2,ethN> --static --ip <ip_address> --netmask <netmask>
network –show
31
DR4100 Best Practice Guide | April 2014
Example
Example
Example
Example
network --delete --member eth2,eth3