Dell PowerVault DX6104 Manuale d'uso - Pagina 8

Sfoglia online o scarica il pdf Manuale d'uso per Immagazzinamento Dell PowerVault DX6104. Dell PowerVault DX6104 39. Dx object storage platform
Anche per Dell PowerVault DX6104: Manuale introduttivo (8 pagine), Manuale introduttivo (10 pagine), Manuale (37 pagine), Nota di rilascio (16 pagine), Manuale (12 pagine), Manuale (24 pagine), Manuale (23 pagine)

Stampa la pagina

Local Cluster Configuration

A basic Dell DX Storage Cluster consists of at least two (three recommended) DX Cluster Services Nodes and at least

two (three recommended) DX Storage Nodes, along with the necessary Ethernet infrastructure to connect them.

Within a cluster, DX Storage Nodes communicate with each other through User Datagram Protocol (UDP) and IP

multicast. All nodes within a cluster must be on the same IP subnet. The DX Cluster Services Node also participates in

UDP and multicast communication and must be located within the same subnet.

The Layer 3 switch (IP router) used to create the storage cluster subnet must:

•

Restrict UDP and multicast network to the cluster subnet

•

Pass TCP (HTTP) traffic to and from the DX Cluster Services Node and DX Storage Nodes

NOTE: A load-balancer in front of the storage cluster is not required. The applications communicate directly with

the DX Object Storage Platform through HTTP.

It is recommended that you configure the network topology to enable applications to communicate with the DX Storage

Nodes on private and secure networks. This is the primary method to store and retrieve data from a local DX Storage

Cluster.

NOTE: If applications write to a cluster through an unsecure network, then to prevent malicious activity, it is

recommended that you allow the application to encrypt the data before writing the data to the cluster.