3 Day Blinds Angled Slat Come iniziare - Pagina 5

Sfoglia online o scarica il pdf Come iniziare per Tende per finestre 3 Day Blinds Angled Slat. 3 Day Blinds Angled Slat 8.

BLIND INSTALLATION

• If you have not already done so unwrap the cellophane from

around the blind stack. Caution: DO NOT cut the cellophane

as the cords or ladders supporting the blind may be

inadvertently cut.

• Insert the headrail into the end brackets, making sure that

no cords or slats are in the way.

• Close the hinges on the end brackets until you hear them

"snap."

• While supporting the bottom of the blind, unwind the draw

cords and gently lower the blind to its full length.

Proceed to "Valance Installation."

| 2 & 2

" Wood & Faux Wood & Angled Slat Blinds

• If you ordered a blind with

a valance, you will need to

install the valance clips to

the front of the headrail

before installing the blind

following the "Valance

Clip Installation" section.

• Be sure the hinged end

brackets are in the open

position.

VALANCE INSTALLATION

You will need to have installed the blind following the "Blind

Installation" section before installing the valance.

Up into Clip on Head Rail

Behind Valance

• Aligning the front and back of each of the valance clips and

slide the valance onto the headrail.

• Once attached adjust the valance to the desired height by

sliding it up or down.