Dell PowerVault MD3200 Series Manuale d'uso - Pagina 22

Sfoglia online o scarica il pdf Manuale d'uso per Immagazzinamento Dell PowerVault MD3200 Series. Dell PowerVault MD3200 Series 38. Storage arrays
Anche per Dell PowerVault MD3200 Series: Manuale di aggiornamento (32 pagine), Istruzioni per l'installazione del rack (2 pagine), Matrice di supporto (12 pagine), Manuale di installazione (18 pagine), Manuale d'uso (38 pagine), Aggiornamento delle informazioni (1 pagine), Matrice di supporto (17 pagine), Manuale tecnico (40 pagine), White Paper (22 pagine), Manuale d'uso (38 pagine)

Expanding With New PowerVault MD1200 Series Expansion Enclosures

Perform the following steps to attach new PowerVault MD1200 series

expansion enclosures to a PowerVault MD3200 series storage array:

1 Before adding the expansion enclosure(s), ensure that the storage array

software is installed and is up to date. For more information, see the

Support Matrix at support.dell.com/manuals.

Install the software and driver package included on the PowerVault

MD series resource media.

For information about installing the software, see "Installing

PowerVault MD Storage Software" on page 25.

Set up the PowerVault MD1200 series expansion enclosure(s).

For information about setting up the PowerVault MD1200 series

expansion enclosure(s), see the Owner's Manual at

support.dell.com/manuals.

Using PowerVault MDSM, update the RAID controller module

firmware and NVSRAM to the latest versions available on

support.dell.com.

Click Tools Upgrade RAID Controller Module Firmware from the

Enterprise Management Window (EMW).

2 Stop I/O and turn off the system and attached units:

Stop all I/O to the storage array and turn off affected host systems

attached to the storage array.

Turn off the storage array.

Turn off any expansion enclosure(s) in the affected system.

3 Cable the expansion enclosure(s) to the storage array.

4 Turn on attached units:

Turn on the expansion enclosure(s). Wait for the enclosure status

LED to light blue.

Turn on the storage array and wait for the status LED to indicate that

the unit is ready:

•

If the status LEDs are solid amber, the storage array is still coming

online.

Hardware Installation