3 Day Blinds ARCH Istruzioni di montaggio/installazione - Pagina 2

Sfoglia online o scarica il pdf Istruzioni di montaggio/installazione per Tende per finestre 3 Day Blinds ARCH. 3 Day Blinds ARCH 8.

Please make sure that you have the following:

• Steel tape measure

• Power Drill and

• Flathead and Phillips screwdriver

• Pencil

• Level (for outside mount)

• Awl (or tool for starting a screw hole)

Included are the screws needed for a normal installation. Depending

on the mounting surface, fasteners other than the screws provided

may be required. Wall board and plaster require the use of anchors

such as expansion or toggle bolts. Bricks, tile and stone need

special plugs and drill bits. Wood should always be pre-drilled to

avoid splitting.

Your wood arch requires some assembly. In your shipment you

should have received the following items:

NOTE: The number of items shipped is dependent on the size of the arch.

Shim

Arch Bottom Rail

GeTTInG STarTed

" Drill Bit (for stand alone arches only)

arch and hardware

Vertical Supports

• Please DO NOT remove the

wood shims in the grooves of

each support until installation

is complete. These shims are

necessary to keep the wood

supports from splitting during

installation

Screws

#6 x

#8 x

" Drywall Screw

Page 1

Wood Slats