Dell Storage Center SCv2000 Manuale d'uso - Pagina 15
Sfoglia online o scarica il pdf Manuale d'uso per Immagazzinamento Dell Storage Center SCv2000. Dell Storage Center SCv2000 42. Storage center
Anche per Dell Storage Center SCv2000: Manuale introduttivo (19 pagine), Manuale introduttivo (20 pagine)
Stampa la pagina
Item Control/Feature
9
Recessed reset button
10
Identification LED
11
USB port
12
Diagnostic LEDs (8)
13
Serial port (3.5 mm mini
jack)
14
Four Mini-SAS High
Density (HD) ports
15
Mini-SAS port B
16
Mini-SAS port A
SCv2000/SCv2020 Drives
Dell Enterprise hard disk drives (HDDs) and Enterprise Solid-State Drives (eSSDs) are the only drives that
can be installed in an SCv2000/SCv2020 storage system. If a non-Dell Enterprise drive is installed,
Storage Center prevents the drive from being managed.
The drives in an SCv2000 storage system are installed horizontally. The drives in an SCv2020 storage
system are installed vertically. The indicators on the drives provide status and activity information.
Figure 8. SCv2000/SCv2020 Drive Indicators
Item
Name
1
Drive activity
indicator
2
Drive status
indicator
About the SCv2000/SCv2020 Storage System
Icon Description
Reboots the storage controller forcing it to restart at the POST
process
•
Off: Identification disabled
•
Blinking blue (for 15 sec.): Identification is enabled
•
Blinking blue (continuously): Storage controller shut down
to the Advanced Configuration and Power Interface (ACPI)
S5 state
Not for customer use on SCv2000/SCv2020 Storage Systems.
—
•
Green LEDs 0–3: Low byte hex POST code
•
Green LEDs 4–7: High byte hex POST code
Not for customer use.
—
Front-end connectivity ports
NOTE:
The mini-SAS HD ports are for front-end connectivity only and
cannot be used for back-end expansion.
Back-end expansion port B
Back-end expansion port A
Indicator Code
•
Blinking green: Drive activity
•
Steady green: Drive is detected and there are no faults
•
Off: Normal operation
•
Blinking amber (on 1 sec. / off 1 sec.): Drive identification is enabled
15