Dell VxRail E660 Manuale di installazione e assistenza - Pagina 28
Sfoglia online o scarica il pdf Manuale di installazione e assistenza per Immagazzinamento Dell VxRail E660. Dell VxRail E660 32.
Anche per Dell VxRail E660: Manuale di installazione e assistenza (32 pagine)
Stampa la pagina
Icon
Description
System health and system ID indicator codes
The system health and system ID indicator is located on the left control panel of the system.
System health and system ID
indicator code
Solid blue
Blinking blue
Solid amber
Blinking amber
iDRAC Quick Sync 2 indicator codes
iDRAC Quick Sync 2 module (optional) is located on the left control panel of the system.
iDRAC Quick Sync 2 indicator
code
Off (default state)
Solid white
Blinks white rapidly
Blinks white slowly
Blinks white five times rapidly
and then powers off
28
System diagnostics and indicator codes
Condition
Condition
Indicates that the system is powered on, is healthy, and system ID mode is not active.
Press the system health and system ID button to switch to system ID mode.
Indicates that the system ID mode is active. Press the system health and system ID
button to switch to system health mode.
Indicates that the system is in fail-safe mode.
If the problem persists, see the
Indicates that the system is experiencing a fault. Check the System Event Log
for specific error messages. For information about the event and error messages
generated by the system firmware and agents that monitor system components, go to
qrl.dell.com
> Look Up > Error Code, type the error code, and then click Look it up.
Condition
Indicates that the iDRAC Quick Sync 2
feature is powered off. Press the iDRAC
Quick Sync 2 button to power on the
iDRAC Quick Sync 2 feature.
Indicates that iDRAC Quick Sync 2 is
ready to communicate. Press the iDRAC
Quick Sync 2 button to power off.
Indicates data transfer activity.
Indicates that firmware update is in
progress.
Indicates that the iDRAC Quick Sync 2
feature is disabled.
Corrective action
If the problem persists, see the
Support
section.
Corrective action
If the LED fails to power on, reseat the left
control panel flex cable and check.
If the problem persists, see the
If the LED fails to power off, restart the system.
If the problem persists, see the
If the indicator continues to blink indefinitely, see
the
Support
section.
If the indicator continues to blink indefinitely, see
the
Support
section.
Check if iDRAC Quick Sync 2 feature
is configured to be disabled by iDRAC.
Support
section.
Support
section.
Support
section.