Dell EMC PowerSwitch N3024EF-ON Come aggiornare il firmware - Pagina 8

Sfoglia online o scarica il pdf Come aggiornare il firmware per Interruttore Dell EMC PowerSwitch N3024EF-ON. Dell EMC PowerSwitch N3024EF-ON 21.

Upgrade Dell EMC Networking N3000E-ON Switches

4. Activate the

6.5.3.36

console#boot system backup

Activating image backup ..

5. Reload the switch.

console#reload

Management switch has unsaved changes.

Are you sure you want to continue? (y/n) y

Configuration Not Saved!

Are you sure you want to reload the stack? (y/n) y

6. After the switch has finished rebooting, log in and verify that the firmware has been updated to the

version using the show version command. A single switch will typically reboot in around two minutes. A

stack may take significantly longer to complete the upgrade process.

console#show version

Machine Description............... Dell EMC Networking Switch

System Model ID................... N3048EP-ON

Machine Type...................... Dell EMC Networking N3048EP-ON

Serial Number.....................

Manufacturer...................... 0xbc00

Burned In MAC Address............. 0090.BC06.A571

System Object ID.................. 1.3.6.1.4.1.674.10895.3060

SOC Version....................... BCM56340_A0

HW Version........................ 5

CPLD Version...................... 20

Image File........................ N3000Advv6.5.3.36

Software Capability............... Stack Limit = 12, VLAN Limit = 4093

unit active

---- ----------- ----------- -------------- --------------

6.5.3.36

7. The switch or stack is now ready for normal operation. Verify the configuration and make any changes

needed prior to connecting the switch to the operational network.

8. Reload the switch.

console#reload

Management switch has unsaved changes.

Are you sure you want to continue? (y/n) y

Configuration Not Saved!

Are you sure you want to reload the stack? (y/n) y

firmware

backup

current-active next-active

6.5.3.36

Page 4

6.5.3.36