Dell EMC PowerSwitch Z9432F-ON Manuale di configurazione - Pagina 22

Sfoglia online o scarica il pdf Manuale di configurazione per Interruttore Dell EMC PowerSwitch Z9432F-ON. Dell EMC PowerSwitch Z9432F-ON 27.

1. Wiring block

2. DC cable

3. PSU socket

1. Strip a one-half inch section of insulation from each of the power connector wires.

2. Insert each of the bare wire power connector lengths into the wiring block.

The blue wire is -48 V, the black wire is the positive return, and the yellow and green wire is the ground wire, 10 AWG

minimum.

3. Use a user-supplied flat-head screwdriver to tighten the screws that secures the bare wires into the wiring block.

4. Remove the plastic cover, the two M4 screws and one M5 screw from the PSU socket. Keep all the removed parts.

5. Attach the blue wire and black wire to the PSU socket. Secure the wires with the two M4 screws.

NOTE:

Attach the blue wire to the V- terminal. Attach the black wire to the V+ terminal.

Z9432F-ON switch installation