Dell Force10 MXL Blade Nota applicativa - Pagina 2

Sfoglia online o scarica il pdf Nota applicativa per Interruttore Dell Force10 MXL Blade. Dell Force10 MXL Blade 6. 10/40gbe blade switches
Anche per Dell Force10 MXL Blade: Manuale introduttivo (38 pagine), Specifiche tecniche (2 pagine), Manuale (27 pagine)

Stampa la pagina

Table of Contents

Introduction ...................................................................................................................................... 2

Enabling SSH................................................................................................................................... 2

Enabling SSL/HTTPS ...................................................................................................................... 4

Introduction

Enabling secure management via Secure SHell (SSH) or Secure Sockets Layer (SSL/HTTPS) on the S-Series is a

four-step process. SSH and SSL both provide an encrypted transport session between the management station and

switch.

1. Generate the SSH keys or SSL certificates offline.

2. Copy the SSH keys or SSL certificates to the switch using TFTP.

3. Enable the secure management server (SSH or HTTPS) on the switch.

4. Disable the insecure version of the management server (Telnet or HTTP).

If you received this document as part of a .zip file, the file should contain two directories: ssh and ssl (the directories

are also on the S-Series CD-ROM). If you did not get the entire .zip file, please contact your Force10 account team.

•

The ssh directory has example RSA1, RSA2 and DSA keys and a shell script called "generate-keys.sh" that can

be used to generate your own SSH keys.

•

The ssl directory has example certificates and a shell script called "generate-pem.sh" that can be used to generate

your own SSL certificates.

The scripts provided use OpenSSH (http://www.openssh.org/) and OpenSSL (http://www.openssl.org/) for key and

certificate generation. Other free and commercial tools exist that can provide the same functionality and you can use

them if you like.

For additional options and commands related to the Telnet, SSH and HTTP/HTTPS features, please consult the

SFTOS manuals.

Enabling SSH

1. Generate the SSH keys using the script in the ssh directory, or copy the example keys (which end in .key) to your

TFTP server.

2. Copy the keys to NVRAM with TFTP as follows from this example, using the IP address of your TFTP server. For

SSHv1, copy the RSA1 key. For SSHv2, copy the RSA1, RSA2, and DSA keys, as shown below.

SFTOS #copy tftp://192.168.0.10/rsa1.key nvram:sshkey-rsa1

Mode........................................... TFTP

Set TFTP Server IP............................. 192.168.0.10

TFTP Path......................................

TFTP Filename.................................. rsa1.key

Data Type...................................... SSH RSA1 key

Management access will be blocked for the duration of the transfer

Are you sure you want to start? (y/n) y

TFTP SSH key receive complete... updating key file...

Key file transfer operation completed successfully

S-Series Secure Management

- 2 -