Dell PowerConnect 2124 Manuale d'uso - Pagina 8

Sfoglia online o scarica il pdf Manuale d'uso per Interruttore Dell PowerConnect 2124. Dell PowerConnect 2124 48. Unmanaged switches
Anche per Dell PowerConnect 2124: Manuale di informazioni sul sistema (33 pagine)

Dell PowerConnect 2124 Manuale d'uso
Use caution when pressing the component rail release latches and sliding a
component into or out of a rack; the slide rails can pinch your fingers.
After a component is inserted into the rack, carefully extend the rail into a locking
position, and then slide the component into the rack.
Do not overload the AC supply branch circuit that provides power to the rack. The
total rack load should not exceed 80 percent of the branch circuit rating.
Ensure that proper airflow is provided to components in the rack.
Do not step on or stand on any component when servicing other components in a
rack.
CAUTION: A qualified electrician must perform all connections to DC power and
to safety grounds. All electrical wiring must comply with applicable local or
national codes and practices.
CAUTION: Never defeat the ground conductor or operate the equipment in the
absence of a suitably installed ground conductor. Contact the appropriate
electrical inspection authority or an electrician if you are uncertain that
suitable grounding is available.
CAUTION: The system chassis must be positively grounded to the rack cabinet
frame. Do not attempt to connect power to the system until grounding cables
are connected. Completed power and safety ground wiring must be inspected by
a qualified electrical inspector. An energy hazard will exist if the safety ground
cable is omitted or disconnected.
Modems, Telecommunications, or Local Area Network Options
Do not connect or use a modem during a lightning storm. There may be a risk of
electrical shock from lightning.
Never connect or use a modem in a wet environment.
Do not plug a modem or telephone cable into the network interface controller (NIC)
receptacle.
Disconnect the modem cable before opening a product enclosure, touching or
installing internal components, or touching an uninsulated modem cable or jack.
8
Safe ty Instr u ctions
C a u t i o n :
S a f e t y
I n s t r u c t i o n s