Dell PowerConnect 8024 Manuale di configurazione - Pagina 14

Sfoglia online o scarica il pdf Manuale di configurazione per Interruttore Dell PowerConnect 8024. Dell PowerConnect 8024 21. Upgrading from version 2.x.x.x or 3.x.x.x or 4.x.x.x or 5.x.x.x to 5.1.9.3 firmware
Anche per Dell PowerConnect 8024: Note di rilascio (27 pagine), Note di rilascio (20 pagine), Aggiornamento del firmware (24 pagine)

Dell PowerConnect 8024 Manuale di configurazione
console(conf-if)#channel-group 1 mode active
console(conf-if)#exit
console(conf)#exit
3.14

Configure SFP+ ports for LAG (M8024)

Note: The commands in this section assign four 10Gb SFP+ ports from an optional expansion module in
the first expansion slot, to the Port Channel. If you have the M8024-k switch, see section 3.13 instead.
console(conf)#interface range tengigabitethernet 1/1/1-4
console(conf-if)#channel-group 1 mode active
console(conf-if)#exit
console(conf)#exit
3.15

Save configuration

console#copy running-config startup-config
This operation may take a few minutes.
Management interfaces will not be available during this time.
Are you sure you want to save? (y/n)y
3.16

Configure additional switch

Repeat the commands from section 3 to configure the second switch.
Note: The preceding procedure places all switch ports in the default VLAN. If you prefer to place ports in a
non-default VLAN, refer to the documentation for your switch.
14
SCG1008
PowerConnect 8024, 8024F, M8024 and M8024-k Switch Configuration Guide for EqualLogic SANs