3 Day Blinds HONEYCOMB SHADE ARCHES Come iniziare - Pagina 5
Sfoglia online o scarica il pdf Come iniziare per Arredamento per interni 3 Day Blinds HONEYCOMB SHADE ARCHES. 3 Day Blinds HONEYCOMB SHADE ARCHES 6.
Stampa la paginaSHADE OPERATION
STANDARD SHADE
• To raise the shade, pull the draw cords down.
• To engage the lock, pull the cords down and toward the
outside of the shade.
• To lower the shade, pull the draw cords down and toward
the center of the shade and allow the cords to slide slowly
though your hand.
TOP DOWN BOTTOM UP
Follow "Standard Shade" instructions above for shade
operation. This shade is diff erent because it has two sets of
cords. One set of cords controls the center rail the other Is for
the bottom rail.
TOP DOWN
Follow "Standard Shade" instructions above for shade
operation. This shade is slightly diff erent because it has one
set of cords that control the center rail only. The bottom rail is
always in the down position.
LEVEL THE BOTTOM RAIL (IF NECESSARY)
Level the Bottom Rail (If Necessary)
• Shades use a system that allows easy leveling of the bottom
rail. It is designed to make slight adjustments (Less than 1")
to level the moving rails of your shade. It is not designed to
make length adjustments. Use a fl at head screwdriver or a
coin (a quarter works best) to turn the adjustment screw in
the bottom rail to raise or lower that side of the bottom rail.
• One quarter turn of the screw will move the bottom rail up
or down approximately
• Over-turning the adjustment screw (more than 1" of
adjustment) can cause the cord to tangle or wedge inside
the rail. The screw should turn easily - Do Not Force.
5
| Honeycomb Shade Arches
/
".
1
4
SHADE REMOVAL
Draw the shade completely up. (See "Shade Operation")
Push shade rail back and rotate the back of the shade down
to release.
• Rotate the back of the headrail down and carefully lift the
headrail off of the front hooks of the mounting brackets.