Dell poweredge VRTX Manuale introduttivo - Pagina 17
Sfoglia online o scarica il pdf Manuale introduttivo per Interruttore Dell poweredge VRTX. Dell poweredge VRTX 30. Server
Anche per Dell poweredge VRTX: Manuale d'uso (35 pagine), Nota di rilascio (5 pagine), Manuale introduttivo (14 pagine), Manuale di avvio rapido e di riferimento (2 pagine), Manuale tecnico (45 pagine), Come iniziare (2 pagine)
Stampa la pagina
- 1. Getting Started Guide
- 1. 1 Hardware and Initial Configuration
- 1. Switch Hardware
- 1. Initial Configuration of the Switch
- 2. Table of Contents
- 2. 2 Using the CLI
- 2. CLI Command Conventions
- 2. Accessing the Device through the CLI
- 2. Retrieving an IP Address
- 2. Security Management and Password Configuration
- 2. Configuring Login Banners
- 2. Startup Menu Procedures
- 2. Software Download
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\Maintenance Projects\Dell
3 Type the following to verify the IP address:
#
console
Gateway IP Address
----------------------- ----------------------- --------
10.5.225.33
IP Address
------------------ --------- ----------- -----------
10.5.225.45/27
When configuring/receiving IP addresses through DHCP and BOOTP (an
older version of DHCP), the configuration received from these servers
includes the IP address and may include the subnet mask and default
gateway.
NOTE:
It is not necessary to delete the device configuration to retrieve an IP
address from the DHCP server.
NOTE:
When copying configuration files, avoid using a configuration file that
contains an instruction to enable DHCP on an interface that connects to the same
DHCP server, or to one with an identical configuration. In this instance, the device
retrieves the new configuration file and boots from it. The device then enables
DHCP, as instructed in the new configuration file, and the DHCP instructs it to reload
the same file.
NOTE:
If you configure a DHCP IP address, this address is dynamically retrieved,
and the ip address dhcp command is saved in the configuration file. In the event of
master failure, the backup will again attempt to retrieve a DHCP address. This could
result in one of the following:
The same IP address may be assigned.
•
•
A different IP address may be assigned, which could result in loss of
connectivity to the management station.
The DHCP server may be down, which would result in IP address retrieval
•
failure, and possible loss of connectivity to the management station.
D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 3 / 6 / 1 3 - F O R P R O O F O N LY
Plasma\GSG\Plasma_UGUsing_CLI.fm
show ip interface
Active
I/F
vlan 1
Activity status
Type
Status
DHCP
Valid
Type
dhcp
Using the CLI
17