Dell S3100 Series Manuale introduttivo - Pagina 22

Sfoglia online o scarica il pdf Manuale introduttivo per Interruttore Dell S3100 Series. Dell S3100 Series 27.
Anche per Dell S3100 Series: Manuale introduttivo (46 pagine), Manuale di installazione (45 pagine)

Stampa la pagina

enable [password | secret] [level level] [encryption-

type] password

Creating a Port-based VLAN

The default local area network (VLAN), VLAN 1, is part of the system startup

configuration and does not require configuration.

To configure a port-based VLAN, create the VLAN and then add physical

interfaces or port channel (LAG) interfaces to the VLAN.

•

Configure a port-based VLAN (if the vlan-id is different from the default

VLAN ID) and enter INTERFACE VLAN mode.

CONFIGURATION mode

interface vlan vlan-id

After you create a VLAN, assign interfaces in Layer 2 mode to the VLAN to

activate the VLAN.

To view the configured VLANs, use the show vlan command in EXEC

Privilege mode.

Assigning Interfaces to a VLAN

You can only assign interfaces in Layer 2 mode to a VLAN using the tagged

and untagged commands.

To place an interface in Layer 2 mode, use the switchport command.

You can designate Layer 2 interfaces as tagged or untagged. When you place

an interface in Layer 2 mode using the switchport command, the interface

automatically designates untagged and is in the default VLAN.

To tag frames leaving an interface in Layer 2 mode, assign that interface as

tagged to a port-based VLAN to tag it with that VLAN ID.

To move untagged interfaces from the default VLAN to another VLAN, use the

untagged command.

Tag interfaces. Access INTERFACE VLAN mode of the VLAN to which you

want to assign the interface.

CONFIGURATION mode

Installing the Software