Dell S4048-ON Manuale di configurazione - Pagina 13

Sfoglia online o scarica il pdf Manuale di configurazione per Interruttore Dell S4048-ON. Dell S4048-ON 30. Enterprise switches
Anche per Dell S4048-ON: Manuale di configurazione (19 pagine), Manuale di risoluzione dei problemi (29 pagine)

Switch configuration (OS 9.x)

2.2.5

Configure DCB policies

Dell(conf)#dcb-map <profile-name>

Dell(conf-dcbmap-profile-name*)#priority-group 0 bandwidth 50 pfc off

Dell(conf-dcbmap-profile-name*)#priority-group 1 bandwidth 50 pfc on

Note: The sum of the bandwidth-percentages must be equal to 100.

Dell(conf-dcbmap-profile-name*)#priority-pgid 0 0 0 0 1 0 0 0

Dell(conf-dcb-profile-name*)#exit

2.2.6

Dell(conf)#interface range tengigabitethernet 1/1–1/48

Dell(conf-if-range-te-1/1-48)# dcb-map <profile-name>

Dell(conf-if-range-te-1/1-48)#exit

Dell(conf)#interface range fortyGigE 1/49 , fortyGigE 1/50

Dell(conf-if-range-fo-1/49,fo-1/50)# dcb-map <profile-name>

Dell(conf-if-range-fo-1/49,fo-1/50)#exit

Dell(conf)#exit

Note: The sum of the bandwidth-percentages must be equal to 100.

2.2.7

Dell#copy running-config startup-config

2.2.8

Repeat the commands from section 2.2 to configure DCB on additional switches.

2.3

One method to revert from a DCB-configured switch to a non-DCB-configured switch is to delete the current

configuration (startup-config) and follow the steps in section 2.1. If deleting the current configuration is not an

option, use the following procedure to unconfigure DCB and enable standard flow control.

Note: This is a disruptive operation that requires downtime. The arrays will temporarily lose communication

with each other. Power off all arrays and hosts connected to the SAN before proceeding with these steps.

2.3.1

Dell#configure

Dell(conf)#no dcb enable

Dell(conf)#exit

Dell EMC Networking S4048-ON Switch Configuration Guide for Dell PS Series SANs | SCG1026