Dell S4248FB-ON Manuale di installazione - Pagina 36
Sfoglia online o scarica il pdf Manuale di installazione per Interruttore Dell S4248FB-ON. Dell S4248FB-ON 47. S4200-on series
Anche per Dell S4248FB-ON: Manuale di configurazione (29 pagine)
Stampa la pagina
Fan air filter replacement
Environmental factors can decrease the amount of time required between air filter replacements. Check the environmental factors regularly.
An increase in temperature and/or particulate matter in the air might affect performance.
CAUTION:
Check the fan air filters at six-month intervals and replace them as necessary. To accurately determine air filter
replacement intervals, regularly monitor the speeds of the cooling fans. An increase in overall fan speed may indicate a clogged
filter.
You must replace the fan air filters with new filters; you cannot clean and reuse the old fan air filters. Replacement filter media must meet
the requirements found in GR-63-CORE.
•
Minimum dust arrestance of 65%, per ASHRAE Standard 52.1-1992. OR
•
Minimum Efficiency Rating Value (MERV) of 2, per ANSI/ASHRAE Standard 52.2-2007.
CAUTION:
For Network Equipment Building Systems (NEBS) compliance, use NEBS approved
filters.
Use fan air filters with reverse blue-banded air flow systems—PSUs and fans. You can replace the air filters individually on each fan within
the switch without powering down a PSU module or disrupting traffic.
The fan air filter media slides into the frame from the top. No tools are required.
1
Determine which filters to replace.
2
Unlatch and remove the first module that needs the filter replaced.
3
Slide the existing filter upwards to remove it from the module.
4
Replace the filter with a new filter of the same size.
5
Reinsert the fan module.
6
Repeat for the remaining modules that need the filter replaced.
36
Fans