Dell W-ClearPass 500 Manuale di installazione dell'hardware - Pagina 8

Sfoglia online o scarica il pdf Manuale di installazione dell'hardware per Interruttore Dell W-ClearPass 500. Dell W-ClearPass 500 13. W-cp500 hardware installation guide

Stampa la pagina

5. Unpacking the 4-Post Rack Installation Assemblies

Before you begin verify the ship kit includes one of the following installation assemblies:

• One power cord

• Installation hardware (shown below)

• The 4-post and/or 2-post rack rail and bracket assemblies

4-POST RACK INSTALLATION HARDWARE

Ten (10) M6 x 6

Phillips Head Screws

Front view

Side view

BOTH RACKS INSTALLATION HARDWARE

Twenty-two (22) M4 x 4

The appliance rack mounting components consist of two sections common to both rack types:

• A set of adjustable outer fixed rack rail assemblies that attach directly to the rack(s).

• A set of inner fixed chassis rail that attach to the appliance (these must be removed from each of the

adjustable rack rail assemblies).

NOTE: See Step 1 in Section 6A on page 8 or Step 1 in Section 6B on page 9 to see these rack assemblies.

The 4-post rack assembly consists of:

• A set of long, fixed rack brackets (A).

• A set of short, fixed rack brackets (B).

NOTE: See Section 6A on the page 8 of this document for the rack bracket assemblies A and B.

The 2-post rack assembly consists of:

• A set of long, fixed rack brackets (A).

• Two sets of short rack brackets (B and C). Set (C) has threaded holes (for placement in the front) to allow

the appliance to be secured in the rack.

NOTE: See Section 6B on page 9 of this document for rack assemblies A, B and C.

W-ClearPass 500 Hardware Installation Guide

Ten (10) Rack Clips

Front

Side

Truss Head Screws

Front view Side view

2-POST RACK INSTALLATION HARDWARE

Eight (8) M5 x 12

Flat Head Screws

Rear

Front view

NOTE: Use the hardware supplied with your

specific rack if different from the hardware

supplied in this kit.

Eight (8) M5 x 12

Cone Washers

Side view