AVYCON AVC-BHN41FT2.8 Manuale di avvio rapido - Pagina 2
Sfoglia online o scarica il pdf Manuale di avvio rapido per Telecamera di sicurezza AVYCON AVC-BHN41FT2.8. AVYCON AVC-BHN41FT2.8 2.
Stampa la pagina
③
Route and connect the cables .
④
Secure the mounting base with camera to the wall with screws as
shown below.
⑤
Bracket adjustment. Before adjustment, preview the image of the
camera on a monitor and then loosen the fixed ring to adjust the view
angle of the camera.
Tilt 80°
Pan 360°
⑥
Tighten the fixed ring after the adjustment.
5. NETWORK CONNECTION
Here we take accessing IP camera via LAN for example.
1. Access Through IP-Tool
Switch
Network Cable
I PC
Network Cable
Router
① Make sure that the camera and the PC are well connected via LAN.
② Find the IP-Tool from the CD and then install it in the computer.
After that, run the IP-Tool as shown below.
Immediate Refresh
Device Name Device Type
Product Model
name
IPC
unknown
name
IPC
unknown
name
IPC
unknown
Total Device: 3
Local IP Address:192.168.1.4
③
Modify the IP address. The default IP address of this camera is
192.168.226.201. Click the information of the camera listed in the
above table to show the network information on the right hand.
Modify the IP address and gateway of the camera and make sure its
network address is in the same local network segment as that of the
computer. Please modify the IP address of your device according
to the practical situation.
Modify Network Parameter
Mac Address
IP Address
Fixed Ring
Subnet Mask
Gateway
For example, the IP address of your computer is 192.168.1.4. So the
IP address of the camera shall be changed to 192.168.1.X and the
gateway shall be changed to 192.168.1.1. After modification, please
enter the password of the administrator and click "Modify" button to
modify the settings.
The default password of the administrator is "123456"
MENU
Computer
Device Network Search
About
IP Address
Http Port
Data Port
Subnet
Modify Network Parameter
192.168.226.201
80
9008
255.255.
Mac Address
CE :98 :23 :75 :35 :22
192.168.1.2
80
9008
255.255.
IP Address
192 .168 . 226 . 201
192.168.1.3
80
9008
255.255.
Subnet Mask
255 . 255 . 255 . 0
Gateway
192 .168 . 226 . 1
Modify
i
Tip: Enter the administrator password, and
then modify the network parameters.
Restore IPC Default Configuration
Subnet Mask:255.255.255.0 Gateway: 192.168.1.1
DNS：210.21.196.6
CE :98 :23 :75 :35 :22
192 .168 . 1 . 201
255 . 255 . 255 . 0
192 .168 . 1 . 1
Modify
④
Double-click the camera listed in the IP-Tool or manually enter the
IP address in the address bar of the web browser to connect IP-CAM.
Then follow directions to download and install the plugin.
⑤
Enter the username and password in the login interface.
The default username is admin; the default passowrd is
123456