EarthQuake EWS600 Manuale di installazione - Pagina 2
Sfoglia online o scarica il pdf Manuale di installazione per Altoparlanti EarthQuake EWS600. EarthQuake EWS600 4. Edgeless high fidelity in-wall speaker series
Stampa la pagina
Dear Valued Customer,
Thank you for purchasing the EWS Edgeless In-Wall Speaker series, one of
Earthquake's most valued in-wall speaker lines. With the proper installation and
operation, the EWS will provide a lifetime of durability and high-end performance.
It is very important to follow all installation/mounting instructions and recommendations
in this manual closely and carefully to insure optimal performance operation and
longevity.
The EWS Features:
- Frameless design for reduced visibility
- Long excursion kevlar speaker and woofer cones
- 1" (25mm) silk dome NEO swiveling tweeters
- ± 3dB bass and treble controls
- Elaborate crossover networks
- Easy Turn-N-Lock™ installation mechanism
- Gold plated, spring loaded terminals
- Magnetically attached, paintable grilles
Painting Guidelines:
The EWS Edgeless In-Wall Speaker grilles are paintable and can accept virtually any
type of paint. Spray and roller paint applications typically provide the best results.
When you are ready to begin painting, remember to shield the driver and tweeter from
the paint. Also, be sure to remove the inner grille cloth prior to painting and replace it
once the paint has completely dried.
WARNING: These products are
capable of generating high
sound pressure levels. You
should exercise caution when
operating these speakers. Long
term exposures to high levels of
sound pressure will cause permanent damage
to your hearing. Sound pressure levels
exceeding 85dB can be dangerous with
constant exposure, set your audio system to a
comfortable loudness level. Earthquake
Sound Corporation does not assume liability
for damages resulting from the direct use of
Earthquake speakers , and urges users to play
volume at moderate levels.
2
Specifications are subject to change without notice
Mounting & Speaker Placement Considerations
Speaker Placement:
The EWS Edgeless In-Wall Speakers are designed to be flush mounted in the walls or
ceilings. To optimize their acoustics you should follow these simple guidelines:
For best stereo reproduction the speakers should be placed an equal distance from
your listening position and separated so that the angle between them is between forty
(40) and sixty (60) degrees. The units should be placed with the tweeters near the ear
level of the seated listener.
BASS
®
In-Wall Speakers
IW-SUB1 0
EWS800
www.earthquakesound.com
TREBLE
BASS
TREBLE
+3
+3
+3
+3
0
0
®
0
0
-3
-3
-3
-3
40 - 60°
Figure 1
EWS800
EWS800
THOR
IW-SUB10
EWS530C
Q10B
Tactile Transducer
Figure 2
EWS800
3