EarthQuake MiniMe DSP P10 Manuale d'uso - Pagina 5

Sfoglia online o scarica il pdf Manuale d'uso per Subwoofer EarthQuake MiniMe DSP P10. EarthQuake MiniMe DSP P10 19.

EarthQuake MiniMe DSP P10 Manuale d'uso

Connection Tips

Ÿ
Keep all power cords away from all signal cables to
prevent humming from induced noise.
Ÿ
Choose reliable signal cable cords (Earthquake
Sound also specializes in high performance RCA
cables and patches).
Ÿ
All speaker wires that are ran through the walls
should be twisted type to reduce potential hum
noise pick-up.
Ÿ
It is best to use a grounded electrical outlet to
power the amplifier.
reference could be unsafe.
electrical contractor about proper grounding.
Safe & Proper handling
The MiniMe DSP P10/P12 subwoofer is considerably
light weight and easy to maneuver. However, we
encourage you to take precaution when unpacking
the unit to prevent any possible damage to your
MiniMe DSP. We further suggest the following:
Ÿ
Do not apply pressure or push against the face of
the speaker as this will cause irreparable damage
to the cone and suspension.
Ÿ
When carrying the MiniMe DSP, make sure that
the speakers/grilles are away from your chest,
eliminating the chance of pushing against the face
of the speaker.
Ÿ
Do not drop the MiniMe DSP or subject it to
sudden shocks. This will damage the external
finish and weaken the enclosure, creating air
leaks.
Ÿ
Avoid exposing the MiniMe DSP to moisture.
Water will damage the structure as well as the
amplifier and speakers.
Ÿ
Cleaning the MiniMe DSP is best done using soft
cloth. If needed, use mild detergent with water.
Like any other electrical unit, always unplug the
unit before cleaning it.
This triangle, which appears on your component,
alerts you to the presence of uninsulated,
dangerous voltage inside the enclosure -
voltage that may be sufficient to
constitute a risk of shock.
Specifications are subject to change without notice.
Lack of input ground
Consult with your
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
Unpacking the MiniMe DSP P10/P12
Ÿ
Keep the original carton and packing materials for
future shipment or storage.
Ÿ
Check for any visual signs of damage. If you
encounter any concealed damage, consult your
Earthquake Sound dealer before proceeding with
unit installation.
Ÿ
Retain the sales receipt as it establishes the
duration of the limited warranty and provides
information for insurance purposes.
Th e MiniMe is packaged well for safety. We highly
suggest having a padded surface when unpacking it.
Step 1:
On a padded surface, carefully place the box on its
side to remove the bottom packing tape and staples.
Step 2:
Without tilting the box too much,
tug the bottom flaps outward and
keep the protective foam in place.
Step 3:
Gently reposition the box upright.
Step 4:
Slide the box off, minding
the protective foam on
the top, bottom and sides
the subwoofer.
This triangle, which appears on your component,
alerts you to important operating and
maintenance instructions in this
accompanying literature.
o f
MiniMe DSP P10/P12
5