EarthStone pagw 110 Istruzioni per l'installazione, il funzionamento e la manutenzione - Pagina 11

Sfoglia online o scarica il pdf Istruzioni per l'installazione, il funzionamento e la manutenzione per Forno EarthStone pagw 110. EarthStone pagw 110 18. Gas fired oven
Anche per EarthStone pagw 110: Disegno dimensionale (2 pagine), Istruzioni per l'installazione, il funzionamento e la manutenzione (17 pagine)

EARTHSTONE OVENS PRE-ASSEMBLED GAS OVEN INSTALLATION INSTRUCTIONS – ETL LISTED

CLEARANCE INFORMATION FOR FACADES

36"

1 inch minimum

clearance to

combustibles

If this area is to be covered with a facade it

must be of a non-combustable material.

Temperature gauge and On/off switch can be

extended to attach over facade.

30"

1 inch minimum clearance to combustibles

Facade

Flue Collar

Models 90 and 110 - 6 inch diameter

Models 130 and 160 - 8 inch diameter

Air gap must be sealed with a non

combustible strip. e.g. Aluminum or s/s

Any adjacent combustible floor which projects

in front of the oven opening must be a

minimum of 30 inches away from each side of

the door opening and 36 inches from the front

of the door opening.

On/off switch for gas burner

Temperature gauge

Do not block the notch exhaust port or the

underside of the primary hood.

Granite mantle

Burner control box, for PAGW models only. Adequate

clearance must be provided for air openings into the

combustion chamber for

operation

. Minimum 24" x 24" located on the bottom half

of the oven. Installing a sealed enclosure around the oven

shell may also cause improper operation by starving the

burner system of combustion air. Also the use of return air

or other venting systems located within sealed enclosures

which surround the oven may cause negative pressure.

servicing

and

proper