EarthWay C25HDS Istruzioni per il montaggio e il funzionamento - Pagina 3

Sfoglia online o scarica il pdf Istruzioni per il montaggio e il funzionamento per Attrezzature per prato e giardino EarthWay C25HDS. EarthWay C25HDS 4. Tow broadcast spreaders

Stampa la pagina
C25 Series
Tow Broadcast Spreader
Assembly/Owners Manual
Calibrating your spreader:
To start your Calibration
1.
Open shut-off fully so that the holes in the bottom of the hopper are
open completely. Fig 1
2.
Move the Rate Control Stop to #30 and tighten, then move the Rate
Control Handle to #30. Fig 2
3.
Adjust the nuts on the pivot to lock the calibration control rod into
position. Fig 3
N
OW YOU ARE NOW READY TO USE YOUR SPREADER
The settings furnished on the Rate Setting Chart are intended as a guide
only. Variations in physical characteristics of material applied, walking
speed, and roughness of ground surface may require slightly different
spreader settings.
Due to the above conditions,
warranty as to the uniformity of coverage actually obtained from the set-
tings listed.
WARRANTY
EarthWay
guarantees this product to be free of defects in original
workmanship and materials for a period of 90-days from sale to the origi-
nal user. If any defect develops during this period
pair or replace this product at no charge provided the defect is not the re-
sult of mishandling or tampering and that this product is received at the
factory with shipping charges prepaid. For quicker service you may call
EarthWay
(574) 848-7491 & 800-294-0671
at
scribe the nature of the defect and we will send repair parts to you. Due to
the corrosive nature of most fertilizers and ice melters,
PRODUCTS, INC. makes no warranty or guarantee against corrosion fail-
ure on models with plated steel or painted steel frames. Clean and dry
your spreader well after each use. Warranty covers parts only, no labor
charges.
DO NOT RETURN TO DEALER FOR REPAIR
EarthWay
1009 Maple Street
Bristol, IN 46507
FOR YOUR RECORDS
_________________________________________
_________________________________________
EarthWay
PRODUCTS, INC. makes no
EarthWay
or write and de-
EarthWay
Contact:
PRODUCTS, INC.
P.O. Box 547
Date Purchased
Store Name
.
will re-

OPERATING INSTRUCTIONS

Before filling hopper, become familiar with the operation of
this spreader and make sure the shut-off is closed completely.
1. Obtain proper setting for material to be used from the
RATE SETTING MATRIX included with this spreader.
2. Move stop bolt on rate gauge assembly to the proper set-
ting.
3. While pulling spreader forward, pull control lever forward
to stop bolt.
4. To stop, push lever backward to close flow holes before
you stop moving.
5. When finished, empty any remaining material from hop-
per.
6. Thoroughly wash spreader and allow to dry before storing.
No oiling is necessary.
HOW TO ORDER SPARE PARTS
All spare parts listed herein may be ordered direct from the
manufacturer,
Be sure to give the following information when ordering.
Call (574) 848-7491 or 800-294-0671, or
email: [email protected], write for current prices.
EarthWay
PRODUCTS, INC.
1. Model Number
2. Part Number
3. Part Description