EarthWise CST00012 Manuale dell'operatore - Pagina 6
Sfoglia online o scarica il pdf Manuale dell'operatore per Trimmer EarthWise CST00012. EarthWise CST00012 9. Cordless 18 volt string trimmer
Anche per EarthWise CST00012: Manuale dell'operatore (8 pagine)
Stampa la pagina
CAUTION: Do not at any time lei brake tluids, gasoline,
IMPORTANT: To assure product SAFETY and
petroleum based products, penetrating oils, etc" come in
RELIABILITY, repairs, maintenance and adjustment should
contact with plasTIc parts. They contain chemicals that can
be perfoflTled
by an authorized service center
Of
other
damage, weaken or destroy plastic.
qualified service organization, always using identical
replacement parts.
Make sure the battery is detached from the unit, then use
only mild soap and
a
damp cloth
to
clean the
1001.
Never let
If you drop the trimmer, carefully inspect it for damage. If the
any liquid get inside the tool; never immerse any part of the
blade is bent housing cracked, or handles broken or if you
tool into a liquid.
see any other condition that may affect the trimmer's
operation, contact your local Authorized Service Center for
Fertilizers and other garden chemicals contain agents which
repairs before putting it back into use.
greatly accelerate the corrosion of metals Do not store the
tool on or adjacent to fertilizers or chemicals.
TROUBLESHOOTING
Problem
Possible
Cause
Possible
Solution
Unit does not run
• Battery not marJng contact
- Check battery is fully inserted
- Lock off no! fully operated
- Check that lock off is funy forward prior to
moving trigger
Battery not installed properly
- Check battery installation
Battery not charged
- Check battery charging requirements
• Line won't feed
- Line tangled in spool
- Unwrap
24" of line and rewind
Line fails to cut off
• Line cutter in guard is damaged or missing
- Return to service center for replacement/repair
- Line extends past guard
- Rewind or trim line cutter
- Battery
win
not charge
Battery not inserted into charger
- Insert battery into charger until red
LED
appears
- Plug charger into
a
working outlet
- Charger not plugged in
Check current at receptacte by plugging in a
lamp or other appliance
- Check to see if receptacle is connected to
a
light switch which
turns
power off when you
turn out the lights
- Surrounding air temperature too hot or too cold
Move charger and tool to
a
surrounding air
temperature of above 40 degree F
(4,5
degree C) or below
105
degree F
( +40,5 degree C)
CALL US FIRST
!!
Call us first with questions abollt operating or maintaining your string trimmer
at
1.800.313.5111
between
7:30
a.m. -
4:30
Eastern Standard Time,
or send emails