Christie LS3S Manuale d'uso - Pagina 15
Sfoglia online o scarica il pdf Manuale d'uso per Altoparlanti Christie LS3S. Christie LS3S 18. Recommended crossover and filter settings
Anche per Christie LS3S: Foglio di istruzioni (5 pagine)
Stampa la pagina
Specifications
Audio
Specification
System type
Driver components
Crossover
a
Frequency response
Maximum sound pressure level
b
(SPL)
System coverage
a
Sensitivity
, 1 W/1 m
Recommended amplifier power
Rated impedance
a
LS3S was measured in 2pi conditions. Such conditions most closely match typical indoor wall mount applications.
Averaged in the 500 Hz-10 kHz range, -6 dB.
b
AES, 6 dB crest factor at 1 m. Maximum continuous SPL is calculated based on sensitivity and AES power handling.
Short-term IEC 268-5 pink noise, 12 dB crest factor. The crest factor was specifically increased to reflect real life
parameters of digital cinema soundtracks. Peak SPL is calculated based on short-term power.
Connections
Specification
Inputs
Power
Specification
b
Power handling
Christie Vive Audio LS3S Speaker User Manual
020-101269-01 Rev. 1 (03-2015)
Description
Line source, 2.5-way, passive, vented enclosure.
One 3.5 in. Kapton ribbon driver with Neodymium magnets and two 6.5 in.
(mid-bass + bass) paper/Kevlar composite drivers.
Linear phase, 2 way, passive at 2.5 kHz 12 dB/octave, low pass at 800 Hz for
bass driver, 6 dB/octave.
70 Hz - 20 kHz @ -6 dB
110 dB (AES) continuous, 122 dB, peak
120° horizontal dispersion, 60° vertical dispersion
89 dB
125 W - 250 W (FTC) at 4 Ohms / Christie CDA3 or Christie CDA5 (depending
on application)
4 Ohms
Description
Screw terminal barrier strip
Description
125-250 W (AES), 250 W (IEC) short-term (12 dB crest factor)
15