Miele NOVOTRONIC W 1903 Manuale di istruzioni - Pagina 18
Sfoglia online o scarica il pdf Manuale di istruzioni per Lavatrice Miele NOVOTRONIC W 1903. Miele NOVOTRONIC W 1903 44. Miele washer user manual
Stampa la pagina
Additional options
Additional options
By selecting one or more of the push-
button options, basic programmes can
be tailored to the type of laundry being
washed.
"Pre-wash"
– Use for heavily soiled or stained
laundry items.
– Available in the "COTTONS", "PER-
MANENT PRESS" and "DELICATES"
programmes.
Add the required amount of powder
detergent to compartment i and j.
"Water plus"
This increases the normal water level to
a slightly higher level:
for particularly delicate fabrics in ad-
dition to the "Gentle action" option,
in hard water areas, if more water is
required for dispensing the deter-
gent,
The "Water plus" option is active in the
following programmes:
the wash and rinse cycles for COT-
TONS.
the wash cycle for PERMANENT
PRESS.
"Gentle action"
For actioning of lighty soiled items, or
delicate fabrics which tend to pill.
Drum movement is reduced by half.
Available in the "COTTONS", "PERMA-
NENT PRESS" and "DELICATES" pro-
grammes.
18
"Short"
For lightly soiled items. The length of
the main wash is shortened. An addi-
tional reduction in temperature is not
recommended as this may lead to poor
wash results.
Selecting the spin speed
Set the selector switch to the
highest setting to save energy if the
laundry is to be dried in a tumble dryer.
The lower the spin speed selected, the
more residual moisture left in the cloth-
ing after spinning. A lower spin speed
may be selected for especially delicate
fabrics. The spin speed in the "PERMA-
NENT PRESS" and "WOOLLENS" pro-
gramme is automatically limited to 900
rpm, and in the "DELICATES" pro-
gramme to 600 rpm.
"Without final spin"
If this option is selected, the laundry
will remain suspended in water at the
end of the programme. If the wash is to
be spun, turn the spin speed selector
from "Without final spin" to the desired
spin speed. If spinning is not desired,
turn the programme selector switch to
"Drain".