Allmand Night-Lite E Series Manuale dell'operatore - Pagina 13

Sfoglia online o scarica il pdf Manuale dell'operatore per Apparecchiature di illuminazione Allmand Night-Lite E Series. Allmand Night-Lite E Series 20. Portable light tower

Stampa la pagina

WARNING

Burn Hazard

• The light fixtures become extremely

hot during use.

• Always use caution and heat–resis-

tant glove when handling the lights

or allow the lights to sufficiency cool

down before handling.

Adjusting The Light Fixtures

NOTE: The light fixtures must be adjust-

ed before raising the light tower.

1. Shut down the unit. See Operating

The Tower Lights. Wait 10 minutes

for the lights to cool.

2. Pull the light arm locking pin (A,

Figure 9) to rotate the light arm on

each side of the light bar (B). Make

sure that the locking pin engages one

of the holes after adjusting.

3. Grasp and swivel the fixture yoke (C,

Figure 9) to adjust each fixture side to

side.

4. Pull the light fixture locking pin (D,

Figure 9) to adjust each fixture up

or down. Make sure that the locking

pin engages one of the holes after

adjusting.

5. When lighting operations are com-

plete, adjust the light fixtures to the

transport position. See Transport

Position.

Figure 9

Rotating The Light Tower Mast

CAUTION

Rotating the light tower mast will cause

the light fixtures to swing, and could

result in minor to moderate injury. Be

careful to rotate the tower slowly, and

be aware of the light fixtures while

rotating the tower.

1. Shut down the lights. See Operating

The Tower Lights. Wait 10 minutes

for the lights to cool.

2. Loosen the light tower mast lock knob

(A, Figure 10).

3. Use the handles (B, Figure 10) to

rotate the light tower mast in the

desired direction.

4. Tighten the light tower mast lock

knob.

WARNING

Failure to tighten the light tower mast

lock knob could cause the light fixtures

to swing inadvertently, especially in

windy conditions or during transport,

and could result in death or serious

injury. Always tighten the light tower

mast locking knob securely after rotat-

ing the light tower mast.

5. When lighting operations are com-

plete, rotate the light tower mast to

the transport position: Align the light

tower mast tab (C, Figure 10) with the

front center of the light tower base.

Tighten the light tower mast lock

knob securely. See also Transport

Position.