Allmatic CT3IND Manuale per l'installazione - Pagina 2
Sfoglia online o scarica il pdf Manuale per l'installazione per Unità di controllo Allmatic CT3IND. Allmatic CT3IND 10. Programmable control board for sliding gates
Stampa la pagina
1. Introduction
The control board CT3IND is a device suitable for operating and controlling the industrial sliding gates with single-phase motor 230V and three-phase
400Vac, in a simple and complete way; it is designed to satisfy all possible needs.
The CT3IND is safe because it is designed with a sense that enables the detection of possible obstacles along the run, furthermore it has a motor
protector that enables to protect the motor in case of over current.
In each control unit it is installed a memory module where the transmitters ( transferable from a control unit to another) are learnt. It is equipped with
2 photocells inputs and 2 safety edges inputs, limit in opening and closing, security stops and a wide display with three keys for settings. It is also
equipped with output for courtesy light and flashing light. It is possible to connect an additional card (R1) to operate an auxiliary function (electric lock
or courtesy light).
Where planned there is also the control of the traffic lights outputs.
ATTENTION: DO NOT INSTALL THE CONTROL UNIT WITHOUT READING THE INSTRUCTIONS FIRST !!!
THE INSTALLATION SHOULD BE PERFORMED ONLY BY QUALIFIED PERSONNEL.
2 / 10
6-1622598
REV.3
23/09/2020
ITA
ENG
FRA
ESP
DEU
POR