Miele DA 196 Manuale di istruzioni per l'uso - Pagina 19

Sfoglia online o scarica il pdf Manuale di istruzioni per l'uso per Cappa di ventilazione Miele DA 196. Miele DA 196 28. Cooker

Retaining plates

There are three retaining plates A, B

and C for fixing the cooker hood to the

wall.

Before mounting the retaining plate

draw a vertical line centrally on the

back wall at the selected position.

First of all drill the holes for attaching

the vapour guide (canopy) and for fit-

ting the retaining plate A.

Mark measurement S from the hob

surface upwards. This marks the

height of the lower rim of the cooker

hood.

Holes for the vapour guide (canopy).

DA 196

Drill a 6 mm diameter hole

middle line 22 mm above the height

marked S and insert a S6 plug into the

hole.

DA 199

Drill two 6 mm diameter holes

above the height S and 250 mm right

and left of centre. Insert S6 plugs.

Retaining plate A

Drill 2 holes, 8 mm in diameter, one

at S +100 mm and one at S + 425

mm on the centre line for the retain-

ing plate and insert S8 plugs

Installation

on the

22mm