Miele DA 200-2 EXT Manuale operativo e di installazione - Pagina 4

Sfoglia online o scarica il pdf Manuale operativo e di installazione per Cappa di ventilazione Miele DA 200-2 EXT. Miele DA 200-2 EXT 36. Cooker

Miele DA 200-2 EXT Manuale operativo e di installazione
This appliance conforms to current
safety requirements. Incorrect use
can however lead to personal injury
and damage to the appliance.
Before installation and before using
for the fist time, read the operating
instructions carefully. They contain
important information on safety, in-
stallation, use and maintenance of
the appliance. This way you will
avoid the risk of accidents and dam-
age to the appliance.
Keep these operating instructions in
a safe place and pass them on to
any future user.
The appliance is intended for do-
mestic use only.
The manufacturer cannot be held liable
for damage caused by improper or in-
correct use of the appliance.
4
Before connecting the appliance to
the mains supply, make sure that
the voltage and frequency details given
on the data plate correspond with the
on-site electricity supply, otherwise the
appliance could be damaged. Consult
a qualified electrician if in doubt.
The electrical safety of this appli-
ance can only be guaranteed when
continuity is complete between the ap-
pliance and an effective earthing sys-
tem which complies with local and na-
tional regulations. It is most important
that this basic safety requirement is
tested by a qualified electrician. The
manufacturer cannot be held liable for
the consequences of an inadequate
earthing system (e.g. electric shock).
Installation work and repairs may
only be carried out by suitably
qualified and competent persons to en-
sure safety. Repairs and other work by
unqualified persons could be danger-
ous and the manufacturer will not be
held liable.
This equipment is not designed for
maritime use or for use in mobile
installations such as caravans, aircraft
etc. However it may be suitable for
such usage subject to a risk assess-
ment of the installation being carried
out by a suitably qualified engineer.