Miele DA 217 Manuale di istruzioni per l'uso - Pagina 25

Sfoglia online o scarica il pdf Manuale di istruzioni per l'uso per Cappa di ventilazione Miele DA 217. Miele DA 217 36. Cooker

With a 6 mm Ø bit drill the 2 holes in

the wall and press the S6 plugs into

the holes.

Screw in the plate C with 2 screws

4 x 30 mm and 4.3 underlying

washers.

Vapour guide/canopy

Drill the following holes before fitting

the vapour guide (see the illustration in

the section on fitting the retaining

plates)

DA 206, DA 216, DA 217:

Drill a hole of 6 mm Ø in the middle

taking measurement w into account

and press an S6 plug into the hole.

DA 209, DA 219:

On the line of the middle hole drill 2

holes of 6 mm Ø 500 mm apart tak-

ing measurement w into account

and press S6 plugs into the holes.

To fit the vapour guide (canopy), the

grease filters and the lighting tubes

must be removed. (See section on

Cleaning and Care).

Hang the vapour guide (canopy) on

to the angle brackets of retaining

plate A.

Secure the vapour guide (canopy)

with 5 x 40 mm screws into each

drilled hole.

Installation