Miele DA 2450 Istruzioni per l'uso e l'installazione - Pagina 27

Sfoglia online o scarica il pdf Istruzioni per l'uso e l'installazione per Cappa di ventilazione Miele DA 2450. Miele DA 2450 32.
Anche per Miele DA 2450: Istruzioni per l'uso e l'installazione (36 pagine), Istruzioni per l'uso e l'installazione (32 pagine)

 Where ducting is horizontal, it must

be laid to slope away at at least 1 cm

per metre. This is to ensure that

condensate cannot drain back into

the extractor.

 If the exhaust ducting is to run through

rooms, ceiling space etc. there may be

great variations in temperature

between the different areas. The

problem of condensation will need to

be addressed. The exhaust ducting

will need to be suitably insulated.

Condensate trap

In addition to insulating the exhaust

ducting, we recommend that a suitable

condensate trap is also installed to

collect and evaporate any condensate

which may occur.

Condensate traps are available for

125 mm or 150 mm ducting.

 When installing a condensate trap,

ensure that it is positioned vertically

and, if possible, directly above the

exhaust socket.

The arrow on the housing indicates

the direction of airflow.

To achieve even further reductions in

noise levels, a special silencer (optional

accessory) can be fitted in the ducting

system.

Air extraction mode

The silencer not only reduces noise

from the motor outside the house, but

also sounds from outside (e.g. traffic

noise). For this reason, the silencer

must be positioned as close as possible

to the ducting exit .

Installation