Miele DA 265-2 Istruzioni per l'uso e l'installazione - Pagina 19

Sfoglia online o scarica il pdf Istruzioni per l'uso e l'installazione per Cappa di ventilazione Miele DA 265-2. Miele DA 265-2 32. Cooker

Electrical connection

All electrical work should be under-

taken by a suitably qualified and

competent person in strict accord-

ance with national and local safety

regulations.

Installation, repairs and other work

by unqualified persons could be

dangerous. The manufacturer can

not be held responsible for unauth-

orised work.

Ensure power is not supplied to the

appliance while installation or repair

work is being carried out.

The cooker hood is supplied for con-

nection to an a.c. 230 V single phase

50 Hz supply.

The voltage, rated load and fusing are

given on the data plate. This is visible

when the grease filters have been

removed. Ensure that these match the

household mains supply.

Connection should be made either by a

double pole fused spur connection

unit, or a fused plug and a suitable

switched socket. The On-Off switch

should be easily accessible after the

appliance has been built in.

When switched off there must be an all-

pole contact gap of 3 mm in the switch

(including switch, fuses and relays

according to EN 60 335).

If the socket is not accessible after

installation (depending on country) an

additional means of disconnection

must be provided for all poles.

Electrical connection

For extra safety it is advisable to install

a residual current device (RCD) with a

trip current of 30 mA (in accordance

with DIN VDE 0664, VDE 0100 Section

739).

Do not connect via an extension lead.