Miele DA 292 i Manuale di istruzioni per l'uso - Pagina 19

Sfoglia online o scarica il pdf Manuale di istruzioni per l'uso per Cappa di ventilazione Miele DA 292 i. Miele DA 292 i 28.

Installation

Attach the spacer bar to the guide

rail (2) located behind the light tube.

Fitting the light tube cover

– DA 262 i

Position the light tube cover and

screw into place (see diagram).

– DA 272 i, DA 292 i

Attach the extension pieces supplied

to the light tube cover, then position

the now extended light tube cover

and screw into place.

Pull the deflector plate out to its limit.

Pull off the transit strips on each side.

For cooker hoods without a front panel

or lightshield:

Push the Allen screws from the

accessory kit onto the cover caps

until the screw heads lie directly

under the holes in the cover caps.

Secure the cover caps on both sides

of the deflector plate using the Allen

screws.

Lightshields . . .

. . . weighing up to 600 g can be fitted

normally.

. . . Those weighing over 600 g need to

have the springs in the snap fittings pre-

tensioned:

Installation