Miele DA 3590 Istruzioni per l'uso e l'installazione - Pagina 5

Sfoglia online o scarica il pdf Istruzioni per l'uso e l'installazione per Cappa di ventilazione Miele DA 3590. Miele DA 3590 44. Cooker hood

Stampa la pagina

Technical safety

Before installation, check the cooker

hood for visible signs of damage.

Under no circumstances should you

use a damaged appliance. It could be

dangerous.

Before connecting the appliance to

the mains supply, make sure that the

voltage and frequency details given on

the data plate correspond with the

on-site electricity supply, otherwise the

appliance could be damaged. Consult

a qualified electrician if in any doubt.

The electrical safety of this

appliance can only be guaranteed if it

is correctly earthed. It is most important

that this basic safety requirement is

present and tested regularly, and

where there is any doubt, the

household wiring system should be

inspected by a qualified electrician.

The manufacturer cannot be held liable

for the consequences of an inadequate

earthing system (e.g. electric shock).

For safety reasons, this appliance

may only be used when it has been

fully installed.

Only open the housing as described

in the instructions given in the

installation sheet and in the Cleaning

and care section of this booklet. Under

no circumstances should any other

parts of the housing be opened.

Tampering with electrical connections

or components and mechanical parts is

highly dangerous to the user, and can

cause operational faults.

Warning and Safety instructions

Installation, maintenance and

repairs may only be carried out by a

Miele authorised person in accordance

with current national and local safety

regulations.

Repairs and other work by unqualified

persons could be dangerous. The

manufacturer cannot be held liable for

unauthorised work.

Faulty components must only be

replaced by genuine Miele original

parts. The manufacturer can only

guarantee the safety of the appliance

when Miele replacement parts are

used.

During installation, maintenance and

repair work, the appliance must be

disconnected from the mains electricity

supply.