Miele DA 424 V Istruzioni per l'uso e l'installazione - Pagina 18

Sfoglia online o scarica il pdf Istruzioni per l'uso e l'installazione per Cappa di ventilazione Miele DA 424 V. Miele DA 424 V 36. Cooker hood with extended canopy

Stampa la pagina

Cleaning and care

Before carrying out any cleaning

or maintenance work, disconnect

the cooker hood from the mains

supply. Ensure that:

– it is switched off at the isolator, or

– it is switched off at the wall socket

and the plug removed, or

– the fuse is withdrawn from the

fused spur connection unit, or

– the mains fuse is disconnected, or

– the screw-out fuse is removed (in

countries where this is applicable).

A range of Miele branded cleaning and

conditioning agents are available to

order through your Miele Dealer /

Chartered Agent, the Miele Spare Parts

Department, or via the internet on

www.miele-shop.com.

Housing

General notes

The surfaces and controls are

susceptible to scratches and

abrasions. Please observe the

following cleaning instructions.

^ All external surfaces and controls can

be cleaned with warm water and a

small amount of washing-up liquid

applied with a well wrung-out soft

sponge or cloth.

^ Wipe the surfaces dry using a soft

cloth.

Do not use too much water when

cleaning the controls. Water could

penetrate into the electronics and

cause damage.

Do not use too much water when

cleaning the controls. Water could

penetrate into the electronics and

cause damage.

Avoid:

– cleaning agents containing soda,

acids, chlorides or solvents,

– abrasive cleaning agents, e.g.

powder cleaners or cream cleaners

and abrasive sponges, as well as pot

scourers or sponges which have

been used previously with abrasive

cleaning agents.

These will damage the surface

material.

Important for appliances with

stainless steel housing

(This infomation does not apply to the

controls).

Stainless steel surfaces can be cleaned

using the Miele E-cloth, or with a

proprietary non-abrasive cleaning

agent designed specifically for use on

stainless steel.

To help prevent re-soiling, a

conditioning agent for stainless steel

can also be used. Follow the

manufacturer's instructions on the

packaging.

If too much conditioning agent is

used traces of it may appear in the

area where the canopy rises and

falls.