Miele DA 5100 D Istruzioni per l'uso e l'installazione - Pagina 24
Sfoglia online o scarica il pdf Istruzioni per l'uso e l'installazione per Cappa di ventilazione Miele DA 5100 D. Miele DA 5100 D 40. Cooker
Anche per Miele DA 5100 D: Istruzioni per l'uso e l'installazione (36 pagine), Istruzioni per l'uso e l'installazione (36 pagine), Istruzioni per l'installazione (1 pagine), Istruzioni per l'uso e l'installazione (36 pagine), Manuale di istruzioni per l'installazione (15 pagine)
Cleaning and care
Cleaning the grease filter by hand
^ Clean the filter with a soft nylon brush
in a mild solution of hot water and a
small amount of washing-up liquid.
Do not use "neat" washing up liquid.
Do not use:
– cleaning agents containing
descaling agents,
– powder cleaners, cream cleaners or
abrasive all-purpose cleaning agents,
– oven sprays.
Cleaning the grease filter in the
dishwasher
^ Place the filter as upright as possible
in the lower basket, with the short
sides upright. Make sure that the
spray arm can move freely.
^ Do not wash at more than 65° C. If a
Miele dishwasher is being used,
select the Sensor wash programme.
^ Use a mild dishwasher detergent.
Depending on the cleaning agent
used, cleaning the filter in a
dishwasher can cause permanent
discolouration to the surface.
However, this will not affect the
functioning of the filter in any way.
^ After cleaning, leave the filter to dry
for a while on an absorbent surface
before putting it back in place.
24
^ When removing the filter for cleaning,
also clean off any residues of oil or
fat from the now accessible housing
to prevent the risk of these catching
fire.
When putting the grease filter back in
position, ensure that the locking clip is
visible facing down towards the hob.
^ If the grease filter is inadvertently
replaced upside down, insert a small
screwdriver blade into the slit to
disengage the clip.
^ After replacing the grease filter,
press the operating hours control for
approximately 3 seconds to reset the
operating hours counter.
The indicator lamp will go out.
^ If the grease filter is cleaned before
the operating hours counter has
reached its maximum, the operating
hours control should be pressed for
approximately 6 seconds to reset the
counter.