Miele DA 5390 W Manuale operativo e di installazione - Pagina 19

Sfoglia online o scarica il pdf Manuale operativo e di installazione per Cappa di ventilazione Miele DA 5390 W. Miele DA 5390 W 36. Cooker hood

Stampa la pagina

A range of Miele branded cleaning and

conditioning agents are available to

order through your Miele Dealer /

Chartered Agent, the Miele Spare Parts

Department, or via the internet on

www.miele-shop.com.

Before any cleaning or

maintenance work is carried out,

disconnect the cooker hood from the

mains supply.

Halogen lamps get very hot

during use and remain hot for some

time after being switched off. The

hot lamps are also susceptible to

damage from damp cleaning. Wait a

few minutes after switching off

before commencing cleaning.

Housing

General notes

The surfaces and controls are

susceptible to scratches and

abrasions. Please observe the

following cleaning instructions.

^ All external surfaces and controls can

be cleaned using a Miele E-Cloth or

with warm water and a small amount

of washing-up liquid applied with a

well wrung-out soft sponge or cloth.

^ Wipe the surfaces dry using a soft

cloth.

Cleaning and care

Do not use too much water when

cleaning the controls. Water could

penetrate into the electronics and

cause damage.

Do not use:

– cleaning agents containing soda,

acids, chlorides or solvents,

– abrasive cleaning agents e.g.

powder cleaners or cream cleaners,

and abrasive sponges, e.g. pot

scourers or sponges which have

been previously used with abrasive

cleaning agents. These will damage

the surface material.

Important for appliances with

stainless steel housing

(This infomation does not apply to the

controls).

Stainless steel surfaces can be cleaned

using the Miele E-Cloth, or with a

proprietary non-abrasive cleaning

agent designed specifically for use on

stainless steel.

To help prevent re-soiling, a

conditioning agent for stainless steel

can also be used. Follow the

manufacturer's instructions on the

packaging.