Miele DA 5990 W EXT Istruzioni per l'uso e l'installazione - Pagina 13

Sfoglia online o scarica il pdf Istruzioni per l'uso e l'installazione per Cappa di ventilazione Miele DA 5990 W EXT. Miele DA 5990 W EXT 36. Rangehood da 5960 w; da 5990 w; da 5990 w ext
Anche per Miele DA 5990 W EXT: Istruzioni per l'uso e l'installazione (36 pagine), Istruzioni per l'uso e l'installazione (36 pagine), Schema di installazione (2 pagine), Istruzioni per l'uso e l'installazione (36 pagine), Istruzioni per l'uso e l'installazione (36 pagine), Schema di installazione (2 pagine)

Stampa la pagina

Miele DA 5990 W EXT Istruzioni per l'uso e l'installazione

,WARNING

TO REDUCE THE RISK OF

FIRE, ELECTRIC SHOCK, OR

INJURY TO PERSONS,

OBSERVE THE FOLLOWING:

Before cleaning or servicing the

hood, disconnect it from the power

supply, see "Important Safety

Instructions".

The halogen bulb is very hot

when in use. It will stay hot for some

time after turned off. Use caution,

danger of burns.

Wet cleaning the hot bulb will cause

damage.

Wait a few minutes after turning it off

before cleaning.

Cleaning the casing

Never use abrasive cleaners,

scouring pads, steel wool or caustic

(oven) cleaners on the hood. They

will damage the surface.

^ The exterior surfaces and controls

can be cleaned with a mild solution

of warm water and liquid dish soap

applied with a soft sponge.

^ Wipe dry using a soft cloth.

Only use a slightly damp sponge

when cleaning the controls. Water

could penetrate into the electronics

and cause damage.

^ Glass surfaces can be cleaned using

glass cleaner.

Cleaning and Care

Avoid:

– cleaning agents containing soda,

acids, chlorides or thinners,

– abrasive cleaning agents

e.g. powder or cream cleansers,

– abrasive sponges, e.g. pot scourers

or sponges which have been

previously used with abrasive

cleaning agents,

– limescale removers.

These will damage the surface.

The following instructions for cleaning

"Stainless steel" surfaces and "Stainless

steel colored controls" should be

followed in addition to the general

"Cleaning the casing" instructions.

Stainless steel

Stainless steel surfaces can be cleaned

using a non-abrasive stainless steel

cleaner.

To help prevent resoiling, a conditioner

for stainless steel can also be used.

Apply sparingly with even pressure.

Stainless steel colored controls

These controls may become dis-

colored or damaged if not cleaned

regularly.

Do not use a stainless steel cleaner

on these controls.