Miele DDF 150 Manuale operativo e di installazione - Pagina 13

Sfoglia online o scarica il pdf Manuale operativo e di installazione per Cappa di ventilazione Miele DDF 150. Miele DDF 150 24. External motor roof installation
Anche per Miele DDF 150: Istruzioni per l'uso e l'installazione (28 pagine), Manuale di istruzioni per l'installazione (28 pagine)

^ Drill four C 6 mm holes at the

positions you have just marked to a

depth of 30 mm.

^ Press S6 plugs into the drill holes so

that they are flush.

^ Push the motor unit housing into the

wall and secure it in position.

^ Position the telescopic inner section

D so that it protrudes approx. 50 mm

out from the brickwork.

^ Inject insulation foam into the space

between the brickwork and the

housing.

^ Secure stainless steel cover A to the

housing using a crosstip screwdriver.

^ The ducting stub on the motor unit

has a diameter of 150 mm when the

appliance is supplied.

Please fit the adapter supplied if a

diameter of 125 mm is required.

^ Push the flexible ducting onto the

stub on the motor unit and secure it

with a hose clip.

^ Connect the control cable plug

connectors.

^ Use the extension cable supplied to

extend the length of the connection

cable, if necessary.

^ If this is still not long enough, please

refer to the notes in "Electrical

connection".

Installation