Miele DDF 150 Manuale di istruzioni per l'installazione - Pagina 16

Sfoglia online o scarica il pdf Manuale di istruzioni per l'installazione per Cappa di ventilazione Miele DDF 150. Miele DDF 150 28. External motor roof installation
Anche per Miele DDF 150: Manuale operativo e di installazione (24 pagine), Istruzioni per l'uso e l'installazione (28 pagine)

Installation

 Remove the roofing around the

installation area.

 Bend the flashing  upwards.

 Position the motor unit on the roof

with the air outlet directed down the

roof.

 Secure the motor unit to the roof

substructure with the fixing plate .

 Replace the roofing. Press down on

the flashing to ensure that it creates a

proper seal.

The flashing should be fitted under

the roofing at the top of the motor

unit and above the roofing at the

sides and bottom of the motor unit.

 If equipotential bonding is required,

connect the earth cable to the

connection point provided  on the

casing.

Equipotential bonding is required if

the control cable is to be extended

by more than the length of the

extension cable supplied (see

"Electrical connection").

 Push the flexible ducting onto the

connection on the motor unit and

secure it with a hose clip.

 Connect the control cable plug

connectors.

 Use the extension cable supplied to

lengthen the connection cable if

necessary.

When feeding the cable and the

exhaust ducting through the

substructure of the roof, be careful to

ensure that any gaps are sealed up

properly afterwards.