HP 124708-001 - ProLiant Cluster - 1850 Manuale di implementazione - Pagina 7

Sfoglia online o scarica il pdf Manuale di implementazione per Desktop HP 124708-001 - ProLiant Cluster - 1850. HP 124708-001 - ProLiant Cluster - 1850 11. Proliant essentials foundation pack installation guide
Anche per HP 124708-001 - ProLiant Cluster - 1850: Manuale di implementazione (35 pagine), Manuale di prevenzione degli errori (12 pagine), Libro bianco tecnico (12 pagine), Aggiornamento del firmware (9 pagine), Panoramica (20 pagine), Manuale di implementazione (26 pagine), Manuale introduttivo (22 pagine), Manuale di risoluzione dei problemi (18 pagine), Manuale di installazione (2 pagine)

Supported components for ProLiant servers

HP recommends using the drivers available on the Windows Server 2008 Foundation media.

The HP ProLiant Support Pack for Microsoft Windows Server 2008 Foundation Version 8.25 is

supported with Windows Server 2008 Foundation on the following ProLiant series servers:

• ProLiant DL300 series servers

• ProLiant ML300 series servers

The HP ProLiant Easy Set-up CD is supported with Windows Server 2008 Foundation on the following

ProLiant servers:

• ProLiant DL100 G6 series servers

• ProLiant ML100 G6 series servers

To see information about supported configurations of Storage Arrays, Host Bus Adapters, switches

and other SAN components, visit the SPOCK (Single Point of Connectivity Knowledge) website at

http://www.hp.com/storage/spock

Windows Server 2008 Foundation can be installed using SmartStart 8.25 or later. Server deployment

of Windows Server 2008 Foundation is supported through SmartStart manual and assisted path

installation options.

To prepare for installation, ensure that the following conditions are met:

The server selected for installation is listed as a recommended ProLiant server platform in

Table 4.

Go to

www.hp.com/go/bizsupport

Foundation installations for the server.

Use the ROM-Based Setup Utility (RBSU) to set date/time and configure the boot controller order

(if necessary).

Use the Option ROM Configuration for Arrays (ORCA) utility, F8 during post, to configure the

RAID settings for the server.

Update iLO 2 firmware to Version 1.42 (or later).

The HP ProLiant Support Pack (PSP) includes operating system-specific bundles of drivers, utilities, and

management agents optimized for ProLiant systems. The PSP is a predefined and tested bundle that

includes setup and software maintenance tools designed to help efficiently install, upgrade, and

manage system software.

PSP makes software maintenance easier by:

• Increasing server manageability

• Enabling administrators to update systems remotely

• Reducing server maintenance costs

• Saving time

to obtain the supported ROM for Windows Server 2008