Miele T 230 C Manuale di istruzioni per l'uso - Pagina 25

Sfoglia online o scarica il pdf Manuale di istruzioni per l'uso per Asciugatrice Miele T 230 C. Miele T 230 C 44. Condenser tumble dryer

Stampa la pagina

Problem

The drying process

goes on too long or

even switches off.

Possible cause

Important: Before attempting to remedy one of the

following causes, switch the dryer off and switch on again

to start the programme again.

Ventilation to and from the

dryer may be insufficient

(e.g because it is installed in

a small room). This has

caused the temperature in

the room to rise sharply.

The fluff filters are clogged

up with fluff or were still wet

when they were replaced.

The laundry has not been

spun sufficiently.

The tumble dryer has been

overloaded.

Metallic components, e.g.

zips have prevented the

dryer from registering the

correct moisture level in the

laundry.

Detergent residues, hair and

fine fibres can block up the

condenser unit.

The vents below the door

are blocked.

Problem solving guide

Remedy

Open a door or window

while the machine is in

operation for increased air

flow.

– Remove any fluff.

– The fluff filters must be

completely dry.

Make sure that your laundry

is thoroughly spun at

highest spin speed for the

type of fabric.

Do not exceed the maximum

load for the programme

selected.

– Close zips and fasten any

hooks next time.

If the problem occurs again,

dry garments with long zips

using "Timed drying - Warm

air".

Check the condenser unit

from time to time and clean

it if necessary (see

"Cleaning and Care").

Remove any objects that are

blocking the vents.