Miele T 586 C Manuale di istruzioni per l'uso - Pagina 26

Sfoglia online o scarica il pdf Manuale di istruzioni per l'uso per Asciugatrice Miele T 586 C. Miele T 586 C 32. Novotronic super condenser tumble dryer

Stampa la pagina

Installation

Fitting a plinth facia

The appliance plinth below the door

can be concealed using a plinth facia.

The height and return of the appliance

plinth cannot be altered.

A higher plinth facia can only be in-

stalled if the overall niche height is

higher.

Plinth height 100 mm (standard)

Niche height 820 mm:

Plinth height 150 mm

Niche height 870 mm: a spacer frame

is required.

Plinth height 200 mm

Niche height 920 mm: two spacer

frames are required.

A plinth facia (60 cm long) can be or-

dered from your kitchen Dealer or

manufacturer. For Miele kitchens

please quote the model number when

ordering.

A cut-out must be made in the plinth

facia around the ventilation slots as

otherwise the airflow to the appliance

will be blocked and the machine will

not work.

Fitting the plinth facia

Stick the small template (supplied) to

the rear upper edge of the plinth

facia.

Cut the plinth facia out following the

template.

Use the strip supplied to seal the cut-

out edge.

Stick the velcro fastener provided to

the appliance plinth.

For this the following procedure is rec-

ommended:

Match up the hooked side and the

looped side of the velcro fastener

lengthwise.

Cut into 2 or 3 pieces.

Peel off the protective backing from

one of the velcro fastener pieces.

Position the cut pieces along the ap-

pliance plinth, at the left and right

hand edge, and in the middle. Press

firmly into place.

Now peel the protective backing off

the other velcro fastener piece.

Address the plinth facia to the adhesive

backing on the velcro and press firmly

into place.