HP 3000 979KS/300 Manuale - Pagina 13

Sfoglia online o scarica il pdf Manuale per Desktop HP 3000 979KS/300. HP 3000 979KS/300 20. 9x9 to k class conversion

Conversion Procedures

This chapter provides a general outline for the procedures to perform a variety of system hardware

changes, including the following:

•

Modifying the Console, Primary and Alternate boot paths

•

Replacing the Core I/O card

•

Installing the Mux panel cable and the console cable

•

Updating Stable Storage

•

Updating the System labels

•

Changing the Nameplate

The detailed procedures for performing these general steps are listed in the Service Manual for the

HP3000 and HP9000 Model 9x9KS and Series Kx00 systems (P/N A2375-90004). Be sure to have

the Service Manual available before starting an conversion.

Use Table 1 on page 1 to identify the conversion kit you need, then use Table 2 following to find out

what procedures to perform in this chapter for your type of system conversion..

Parts Included in Conversion

Kits

Core I/O card

Modem Distribution Panel, cables

and Console cable (p/n A2442A

opt. 001 or 002)

K Class Nameplate

HP 9000 system labels

Caution

Be sure to follow all Electrostatic Discharge guidelines stated in Chapter 1.

Failure to do so could result in component damage and loss of system

reliability.

•

#10 & #15 TORX head driver

•

Standard CE hand tools

•

Service Manual (P/N A2375-90004) most current edition.

Table 2. System Conversion Procedures

Use These Procedures:

Replacing the CoreI/O card

Installing the MDP and cables

Changing the Nameplate

Updating the system labels.

Conversion Procedures 5