HP 6930p - EliteBook - Core 2 Duo 2.8 GHz Manuale d'uso - Pagina 14

Sfoglia online o scarica il pdf Manuale d'uso per Desktop HP 6930p - EliteBook - Core 2 Duo 2.8 GHz. HP 6930p - EliteBook - Core 2 Duo 2.8 GHz 17. Notebook tour
Anche per HP 6930p - EliteBook - Core 2 Duo 2.8 GHz: Specifiche tecniche (45 pagine), Manuale del prodotto (16 pagine), Manuale d'uso (15 pagine), Aggiornamento software (12 pagine), Manuale di configurazione (15 pagine), Manuale di rete (16 pagine), Manuale d'uso (25 pagine), Manuale d'uso (27 pagine), Panoramica (16 pagine), Manuale di installazione del software (8 pagine), Manuale di installazione e configurazione (18 pagine), Manuale d'uso (14 pagine), Manuale d'uso (41 pagine), Specifiche tecniche (48 pagine), Manuale d'uso (32 pagine), Manuale d'uso (27 pagine)

Stampa la pagina
HP 6930p - EliteBook - Core 2 Duo 2.8 GHz Manuale d'uso

Using the MEBx setup utility menus

NOTE:
For more information on iAMT, see the Intel Web site at http://www.intel.com/vpro.
Intel ME Configuration
Select
Intel ME State Control
Intel ME Firmware Local Update
LAN Controller
Intel ME Features Control
Intel ME Power Control
Intel AMT Configuration
Select
Host Name
TCP/IP
Provisioning Server
Provision Model
Set PID and PPS
Un-Provision
SOL/IDE-R
Secure Firmware Update
Set PRTC
Idle Timeout
Change Intel ME Password
Select
Change ME Password
8
Chapter 2 Using Intel Active Management Technology (select models only)
To do this
Disable/enable the management engine.
Disable/enable local management of firmware updates.
Disable/enable the integrated network controller.
Enable AMT or none.
Configure the management engine power policies.
To do this
Assign a host name to the computer.
Disable/enable network interface or DHCP (assigns an IP
address if DHCP has been disabled) or change the domain
name.
Assign a Provisioning server address.
Assign Enterprise or Small Business Intel AMT model.
Enter PID and PPS.
Reset the AMT configuration to factory defaults.
Enable remote boot control to IDE floppy or CD-ROM and
assign a username and password.
Enable or disable updating firmware remotely.
Set the real-time clock.
Set a time-out value.
To do this
Change the password.
NOTE:
The default password is admin.